ZENY Plastic Electric Lab Laboratory Centrifuge Machine Lab Medical Practice

Thanks for choosing our ZENY products. The table-centrifugal machines are widely used in the laboratory or produce department for organisms, medical, chemistry, etc. The lower speed centrifugal machine with the maximum speed of 4000r/min and be equipped with/without a timer. It mainly is used for the appraisal of radioactivity and separate cell or particle.

• Features
• Has a maximum capacity of 6 x 20ml and a maximum speed of 4000rpm, making it a great choice for low volume sample separation. 
  Intended as a worktop centrifuge 
  Compact and quiet enough to install in an office or classroom as well as in laboratories and medical settings 
  The speed dial ranges from 0-4000rpm and it has a 0 to 60 minute timer. 
  Safe, compact and quiet to use 
  Ideal for home and educational settings

• Specifications

• Model:800-1
  Maximum speed:4000r/min
  Capacity:20ml×6
  Maximum relative Centrifugal force:1790×g
  Time rang:0~60min.or without limit
  Electric current: AC 110V 60 HZ
• Operation

• Put the machine on a level and strong table and keep the working room clear, dry and ventilated. 
  Indoor temperture5- 32℃ is ok Open the power supply and make sure the indicator lamp is light. 
  Open the cover of the machine, clear the rotor and container. 
  
• Put the test tube (with same weight) into the machine. 
  Put down the cover of the machine . 
  Adjust the timer as your requirement. 
  Switch ON the power. Adjust the governor as you requirement. 
  Before you are going to stop the work, you should adjust the governor to "0" first, and then clean the container and rotor.

• Safety Warning

• After you open the power switch, please shut the power supply and make an examination if the indicators not light Do not operate the machine the machine without rotor . When you are going to operate the machine, you should make the rotor is not corroded/hurt. Do not open the cover of the machine and touch the rotor when the rotor when the rotor is in moving. Do not operate the machine if the rotor is not balance assembled.
• • Features
  • Has a maximum capacity of 6 x 20ml and a maximum speed of 4000rpm, making it a great choice for low volume sample separation. 
    Intended as a worktop centrifuge 
    Compact and quiet enough to install in an office or classroom as well as in laboratories and medical settings 
    The speed dial ranges from 0-4000rpm and it has a 0 to 60 minute timer. 
    Safe, compact and quiet to use 
    Ideal for home and educational settings

  • Specifications

  • Model:800-1
    Maximum speed:4000r/min
    Capacity:20ml×6
    Maximum relative Centrifugal force:1790×g
    Time rang:0~60min.or without limit
    Electric current: AC 110V 60 HZ
  • Operation

  • Put the machine on a level and strong table and keep the working room clear, dry and ventilated. 
    Indoor temperture5- 32℃ is ok Open the power supply and make sure the indicator lamp is light. 
    Open the cover of the machine, clear the rotor and container. 
    
  • Put the test tube (with same weight) into the machine. 
    Put down the cover of the machine . 
    Adjust the timer as your requirement. 
    Switch ON the power. Adjust the governor as you requirement. 
    Before you are going to stop the work, you should adjust the governor to "0" first, and then clean the container and rotor.

  • Safety Warning

  • After you open the power switch, please shut the power supply and make an examination if the indicators not light Do not operate the machine the machine without rotor . When you are going to operate the machine, you should make the rotor is not corroded/hurt. Do not open the cover of the machine and touch the rotor when the rotor when the rotor is in moving. Do not operate the machine if the rotor is not balance assembled.