Kitchen Bathroom Waterproof Window Shades, Cordless 100% Blackout Waterproof and Oilproof Resistent, Provide Privacy and Easy Care White Window Blinds

MOUNT TYPES: Inside mounted shades will have a deduction taken of approximately 1/4" to ensure a proper fit inside the window frame.Inside mounted shades require a minimum frame depth of 2.5inch for secure installation. If your window frame depth is less than 2.5inch please select outside mount.Outside mounted shades should be ordered with the exact width of the area you wish to cover. Outside mounts are often used when there is not sufficient frame depth for inside mounting.Our shades come with all mounting hardware, and mounting hardware for both inside mount and outside mountINSIDE MOUNT MEASUREMENT: Step 1.Measure the inside frame width at three locations-the top,middle,and bottom. Record the smallest of the 3 measurements and use that number deduct 1/4inch as your inside width when ordering.Step 2. Measure the height at 3 locations-the left,middle,and right side. Record the smallest of the 3 measurements and use the number as your inside width when ordering.OUTSIDE MOUNT MEASUREMENT: Step 1. Measure the outside frame width adding 6-10inch to be the outside mount width.Step 2. Measure the outside frame length adding 5-10inch to be the outside mount length. The overlap it recommended to allow appropriate coverage and avoid any light gaps.Type: Solid color roller shade.Feature: Thermal Blackout Waterproof Material: Polyester FabricInstallation: All Mounting Hardware Included.

• PRODUCT: Cordless 100% Blackout Waterproof window shades, no sunlight gets through this roller shades and fabric is same color facing the street, water proof and oil proof and mildew resistent thick fabric good for any room especially for bath and kitchen. Energy saving insulates againest heat and cold and provide privacy.
• PLEASE RESPONSE EMAIL: We can customize shades up to an 1/8th inch. Order the closest size and then we will send email within 24 hours to confirm window information, please give us confirmation in 48 hours. You can get roller shades earlier if reponse us sooner. PAY ATTENTION: PO BOX and APO address not accepted
• INSIDE MOUNT: Min depth for an inside mount is 2". Order size is your window size NOT the shade size, we will take proper deduction to make sure shade can fit into window. PAY ATTENTION: The shade width includes the brackets which take up a minimum of 0.6" on each side then you have your roll with the fabric. So fabric width will be at least 1.2" smaller total.if your frame is too thin to cover the gap, or frame depth is less than 2" please change to outside mount
• OUTSIDE MOUNT: Order size is the shade size NOT window size. Shade width need to be 3-6" wider than window width, shade length need to be 3-5" longer than window length for better coverage. Our shade are good for both inside mount and outside mount, shade size need to be very accurate so please make sure check below MOUNT TYPE AND MEASUREMENT information before order.
• MADE TO ORDER:Please order the custom shade via below steps. STEP 1, Choose your color.STEP 2: Hit the "customize now" button on the right side to fill out your customize sizes. STEP 3: Select inside or outside mount.STEP 4: Select your custom sizes.